admin

AIR AND GAS FLOAT TRAPS Enquiry Form SG IRON Details   FA line of air and gas vents for liquid systems, manufactured in SG iron and designed for all types of low and high-pressure applications. The available models cover a wide range of flow rates, in various sizes, with different connections and multiple options to choose […]

Valves For Special Application Enquiry Form VPA26/2 Details The VPA26/2 blowdown valve series was specially designed for application on steam boilers, to remove sludge sediments that naturally settle on the bottom of the boiler. These intermittent valves operate manually or automatically with timed control. This valve is available with a diaphragm actuator and/or manual operation

Acutators Enquiry Form PA Linear pneumatic actuators Details PA series pneumatic multi-spring actuators with rolling diaphragm, offering decreased hysterisis and good linearity throughout the operating range. Available with direct or reverse action for modulating and on/off services. EL Details Electric linear actuators EL series for modulating and open-close duty of control and process technology to

INSTRUMENTATION Enquiry Form BCS-211 Details The BCS-211 controller is part of the dissolved solids (TDS) control system used in steam boilers. This system is composed of a SPS series conductivity probe, a BCS-211 controller, a VPC series blowdown valve and, in case of need, a UC-820 universal process controller for PID control. PCS1 Details The

Self-Acting Temperature Control valve Enquiry Form TR  Details The TR valves series were designed for direct-acting temperature control systems where the valve closes on temperature rise. They are single seated, in order to ensure an excellent tightness and are intended to be coupled with the thermostat models T.205 and T.405. TR25/R  Details The TR25/R valves

Three Way Control Valves Enquiry Form V253  Details The V253 is a series of three-way globe control valves designed to ensure accurate control in mixing or diverting general service applications. These valves can be assembled with pneumatic, hydraulic or electric actuators and used with the most common process fluids such as water, superheated water, thermal

Two Way Control Valves Enquiry Form PAV21 Pneumatic angle type interception valve Details The PAV series angle seat interception valves are designed for use with steam, gases and other fluids used in the process industry. They are an efficient solution to fluid interception in applications where flexibility and affordable cost are required. PV40 Details The

PRESSURE REDUCING STATION Enquiry Form RP45TW Details The ADCA RP45TW series pressure reducing station consists of two standard RP45 valves installed in parallel. This system is particularly recommended for installations where a single valve cannot reach the maximum required flow rate or when the consumption variation is significant, being prudent to install two smaller valves

PRESSURE SUSTAINING VALVES Enquiry Form PS46 Details   The ADCA PS46 series pressure sustaining valves are single seated, bellows sealed controllers that operate without auxiliary energy. These valves are designed for use with steam, compressed air, and other gases compatible with the construction. They are particularly suitable for sustaining steam pressure in all energy and process

PRESSURE REDUCING VALVES Enquiry Form PRV25 Details   The ADCA PRV25 series of direct acting pressure reducing valves, are designed for use on steam, compressed air, water and other gases and liquids. They are suitable for reducing steam pressure at the point of use on laundry machines, dyeing, food industries, sterilizers, etc.   PRV57 Details   The