admin

Clean Steam Humidity Separators Enquiry Form S10H Details   When wet steam is used in sterilization, moisture in suspension reduces the heat transfer efficiency, and the validity of the sterilization process can be compromised. S10H series baffle separators remove moisture from steam pipelines. Steam passes through the separator and as a result of expansion, impact and […]

Sample Coolers Enquiry Form SC32P Details   The ADCAPure SC32P sample cooler consists in a helical-coil heat exchanger used to take samples quickly and safely from steam generators, clean or pure steam systems, WFI and other high purity mediums. Its spiral design saves significant space without compromise and a counter current flow path maximizes heat transfer

Tailor Made  Enquiry Form Special equipment   ADCAPure tailor made equipment, such as skid mounted systems, clean steam injectors, mushroom style air vents, and others, are available as a complement of this wide sanitary range.

COMPLEMENTARY EQUIPMENT Enquiry Form AS Details   The AS series centrifugal air and dirt separators were designed to be used in the flow line of a hydronic heater or cooling system. The operation is based on the principle of centrifugal force, instead of relying on low-velocity separation, offering the advantage of efficient separation in a smaller

BOILER HOUSE EQUIPMENT Enquiry Form RV Details   The flash vessel is the main component in any flash recovery system. It can be used in all steam plants where high pressure condensate is reduced to a lower pressure, so that flash steam is formed by reevaporation. This steam can be used in low pressure process or

ADCATHERM HEAT EXCHANGERS Enquiry Form STS Details   The ADCA STS series steam to water shell and tube heat exchangers are shorter and lighter than the alternative shell and tube exchangers manufactured with smooth pipes. The use of extruded low fin tube has the advantage that it can improve the external surface and thermal performance. STH

PACKAGED UNITS/SKIDS Enquiry Form ECRU Details   The ADCAMAT ECRU series electric condensate recovery units are recommended in the transfer of high-temperature water such as hot condensate, to a higher elevation or pressure. This condensate is usually used as boiler feedwater. The standard models are prepared for flows up to 20 m3/h, or higher on request.

STEAM/WATER MIXERS Enquiry Form MX20 Details   The steam/water ADCAMix MX20 mixers provide a cheap and instantaneous source of low-pressure hot water, by using existing steam and cold water supplies. The mixer incorporates a safety device, to ensure that live steam cannot be accidentally ejected even if, for some reason, the cold water supply fails. SG20

STEAM INJECTORS Enquiry Form SI20 Details   The SI20 series steam injectors from ADCA are condensate injectors. They ensure low noise and vibration and rapid heating of still or flowing fluids in basins and vessels due to direct steam injection. SI115 Details   The SI series steam injectors from ADCA are condensate injectors. They ensure low noise

DIRECT STEAM HUMIDIFIERS Enquiry Form DSH Details   The ADCA DSH series of direct steam injection humidifiers are designed to ensure highly efficient and moisture free steam injection in air ducts and AHU for humidification purposes. These units are completely manufactured from corrosion resistant stainless steel, and are available as plug and play packaged solutions or