admin

 Wet Gas Detector Enquiry Form Details Increasingly stringent air quality requirements have led to expanded use of wet scrubber systems to control pollutant gases released as air emissions. Chlorine storage facilities and chemical process plants are frequently required to scrub exhaust gas streams to remove halogen and acid gases. Unfortunately, monitoring reactive gas concentrations in […]

Gas Alarm Module Enquiry Form Details PTT’s Gas Alarm Module Receivers are compact electronic modules that provide local alarm, display, and signal retransmission functions for gas detection systems. The modules are designed to accept input from either two, three, or four wire 4-20 mA transmitters located up to 10,000 feet from the receiver. They’re ideally

Wire Gas Transmitter Enquiry Form Details Transmitters are loop-powered instruments that transmit a 4-20 mA signal linearly proportional to gas concentration. Operated from a 24 VDC power supply, the transmitter will drive loads up to 675 ohms, sufficient for most monitoring applications. Alternatively, the unit can operate at 12 VDC with reduced output load for

 Wet H2S Gas Detector Enquiry Form Details Odor control in wastewater treatment plants and sewage collection systems often requires the use of scrubber systems. Many of these scrubbers employ a wet process using a hypochlorite solution to remove hydrogen sulfide (H2S) from air streams prior to discharge. Monitoring the hydrogen sulfide in both inlet and

Ex-IR Infrared Gas Transmitter Enquiry Form Details Ex-IR is a versatile infrared system used primarily for the detection of combustible levels of methane or other hydrocarbons. It may also be used for monitoring CO2 levels, either in ppm or percent levels.The Ex-IR employs a compact infrared sensor for monitoring without the poisoning problems found with

Toxic and Combustible Gas Detector Enquiry Form Details PTT’s Toxic and Combustible Gas Transmitter will accept up to 46 different sensors, greatly reducing the need for multiple gas transmitter models. The self-aligning sensor holder simply plugs in, with automatic gas sensor recognition and verification when contact is made. For many toxic and combustible gases, PTT

Toxic Gas Detectors Enquiry Form Details PTT’s Toxic Gas Detector is designed to measure toxic gases and oxygen in hazardous locations requiring an Intrinsically Safe (IS) device.  A non-IS version, is also available for non-hazardous locations. For many toxic gases, PTT offers a unique sensor response testing system unmatched by any competitive gas transmitter. Even

Portable Gas Leak Detector Enquiry Form Easy To Use: PTT’s  Portable Gas Leak Detector is a versatile tool for performing regular leak checks in gas storage areas, around process equipment, piping, or in confined spaces prior to entry. Designed for easy one-hand operation, the gas detector contains an internal sample pump and a flexible sampling

 Modular Gas Detector Enquiry Form Details The GasSens Modular Gas Detector is a flexible component system providing a variety of options to meet individual gas detection and alarm requirements. From chemical and petrochemical plants to food processors, the GasSens system can be applied to the simplest or most complex gas detection application. Economical and low

Replacement Amonia Gas Sensor Enquiry Form Details PTT offers economical Ammonia Gas sensors for many Honeywell, Manning & Calibration Technologies models. Come to the source! For over 15 years, PTT has manufactured the ammonia sensors used in your Manning Systems leak detectors. Now, you can buy direct from the source and save time & money.